Hollingworth design operate 4x CNC lathes: An Index G200 Turn-Mill, the XYZ CT52 LTY, DMG Mori CTX Beta 1250 TC and Emco Hyperturn 45.
Specifications:
Index G200 Turn-Mill
![](https://www.h-d-l.co.uk/wp-content/uploads/2020/08/CNC-1.png)
- Up to three tool carriers with Y-axis usable on main and counter spindles
- Simultaneous machining with up to 4 tools possible
- Powerful and dynamic milling spindle (360° B-axis, max. 7,200 rpm, 22 kW and 52 Nm, HSK-A40)
- Economic complete machining of parts as well as of bar stock and as of chuck parts
- Incomparably large degrees of freedom in the large work area for turning-milling operations with up to 660 mm turning length
XYZ CT52 LTY
![](https://www.h-d-l.co.uk/wp-content/uploads/2020/08/CNC-4.png)
- 23HP / 17kW spindle
- 200 mm Chuck
- 52 mm bar capacity
- 4500 rpm spindle
DMG Mori CTX beta 1250 TC
![](https://www.h-d-l.co.uk/wp-content/uploads/2021/11/CNC-5.png)
- Turn and Mill, purchase by HDL from a Formula 1 team
- 2x spindles
- 76mm spindle
- 1200mm workpiece length
- 60 part tool holde
Emco Hyperturn 45
![](https://www.h-d-l.co.uk/wp-content/uploads/2021/11/CNC-6.png)
- 2x spindles
- 2x turrets
- 45mm spindles
- 7000 rpm
- 510mm workpiece length
Index C100 Turning Centre
![](https://www.h-d-l.co.uk/wp-content/uploads/2022/09/C100_open.png)
- 42 mm spindle clearance
- 110 mm chuck diameter
- 515 mm turning length
- Simultaneous machining using 2 or 3 turrets
- High acceleration (1g) and high rapid traverses (60 m/min)
- Workpiece carrier with Y-axis available on main and counter spindles
- 2 powerful motor spindles of identical design
- Very good vibration damping due to INDEX SingleSlide
- Maximum parts variety through 3 turrets and 42 tools
- Already included: the operating system iXpanel – i4.0 ready with 18.5” touch screen and INDEX C200 sl based on Siemens S840D sl